Studio Material Notes & Bucket Care

Practical checks on specific gravity, flocculants, and substitute feldspars when bags change quarry lot.

Measuring Specific Gravity

Tarred graduated cylinders give repeatable coat thickness regardless of ambient humidity. Weigh 100 ml of well-stirred glaze slurry in grams and divide by 100: fluid dipping glazes sit between 1.42 and 1.47, while brushing liners work cleaner near 1.55 with a half-percent CMC gum binder.

Epsom Salts Suspension Check

High-nepheline recipes slowly leach soluble soda and turn thin on top above a cement-hard sediment layer at the bucket floor. Add saturated Epsom salt solution two milliliters at a time while stirring until the slurry clings in a faint gel coating on a finger for three seconds without sliding off.

Sieve Mesh Selection

MeshOpening (microns)Recommended Use
60 mesh250Speckled glazes containing granular ilmenite or rutile
80 mesh177Standard Cone 6 satin matte and gloss buckets
100 mesh149Translucent celadons and spray-booth colorants